Intel and compatable CPU's Programming Information

Intel SSE MMX2 KNI documentation

AMD 64 Bit & Opteron resource on this site

Intel Itanium 64 Bit processor

CPU Heat Dissipation Table

Intel 80386 Reference Programmer's Manual

Our Partners:

up: Chapter 17 -- 80386 Instruction Set
prev: SCAS/SCASB/SCASW/SCASD Compare String Data
next: SGDT/SIDT Store Global/Interrupt Descriptor Table Register


SETcc -- Byte Set on Condition

Opcode   Instruction  Clocks  Description

0F  97   SETA r/m8    4/5     Set byte if above (CF=0 and ZF=0)
0F  93   SETAE r/m8   4/5     Set byte if above or equal (CF=0)
0F  92   SETB r/m8    4/5     Set byte if below (CF=1)
0F  96   SETBE r/m8   4/5     Set byte if below or equal (CF=1 or (ZF=1)
0F  92   SETC r/m8    4/5     Set if carry (CF=1)
0F  94   SETE r/m8    4/5     Set byte if equal (ZF=1)
0F  9F   SETG r/m8    4/5     Set byte if greater (ZF=0 or SF=OF)
0F  9D   SETGE r/m8   4/5     Set byte if greater or equal (SF=OF)
0F  9C   SETL r/m8    4/5     Set byte if less (SF<>OF)
0F  9E   SETLE r/m8   4/5     Set byte if less or equal (ZF=1 and
                              SF<>OF)
0F  96   SETNA r/m8   4/5     Set byte if not above (CF=1)
0F  92   SETNAE r/m8  4/5     Set byte if not above or equal (CF=1)
0F  93   SETNB r/m8   4/5     Set byte if not below (CF=0)
0F  97   SETNBE r/m8  4/5     Set byte if not below or equal (CF=0 and
                              ZF=0)
0F  93   SETNC r/m8   4/5     Set byte if not carry (CF=0)
0F  95   SETNE r/m8   4/5     Set byte if not equal (ZF=0)
0F  9E   SETNG r/m8   4/5     Set byte if not greater (ZF=1 or SF<>OF)
0F  9C   SETNGE r/m8  4/5     Set if not greater or equal (SF<>OF)
0F  9D   SETNL r/m8   4/5     Set byte if not less (SF=OF)
0F  9F   SETNLE r/m8  4/5     Set byte if not less or equal (ZF=1 and
                              SF<>OF)
0F  91   SETNO r/m8   4/5     Set byte if not overflow (OF=0)
0F  9B   SETNP r/m8   4/5     Set byte if not parity (PF=0)
0F  99   SETNS r/m8   4/5     Set byte if not sign (SF=0)
0F  95   SETNZ r/m8   4/5     Set byte if not zero (ZF=0)
0F  90   SETO r/m8    4/5     Set byte if overflow (OF=1)
0F  9A   SETP r/m8    4/5     Set byte if parity (PF=1)
0F  9A   SETPE r/m8   4/5     Set byte if parity even (PF=1)
0F  9B   SETPO r/m8   4/5     Set byte if parity odd (PF=0)
0F  98   SETS r/m8    4/5     Set byte if sign (SF=1)
0F  94   SETZ r/m8    4/5     Set byte if zero (ZF=1)

Operation

IF condition THEN r/m8 := 1 ELSE r/m8 := 0; FI;

Description

SETcc stores a byte at the destination specified by the effective address or register if the condition is met, or a 0 byte if the condition is not met.

Flags Affected

None

Protected Mode Exceptions

#GP(0) if the result is in a non-writable segment; #GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS, or GS segments; #SS(0) for an illegal address in the SS segment; #PF(fault-code) for a page fault

Real Address Mode Exceptions

Interrupt 13 if any part of the operand would lie outside of the effective address space from 0 to 0FFFFH

Virtual 8086 Mode Exceptions

Same exceptions as in Real Address Mode; #PF(fault-code) for a page fault


up: Chapter 17 -- 80386 Instruction Set
prev: SCAS/SCASB/SCASW/SCASD Compare String Data
next: SGDT/SIDT Store Global/Interrupt Descriptor Table Register